Copper(II) catalyzed cross-dehydrogenative coupling of cyclic benzylic ethers with simple carbonyl compounds by Na2S2O8

Copper(II) catalyzed cross-dehydrogenative coupling of cyclic benzylic ethers with a variety of simple carbonyl compounds mediated by Na₂S₂O₈ is developed. The scope of carbonyl components is broad, including simple aldehydes as well as ketones. The use of Na₂S₂O₈ as the oxidant for the CDC reaction is attractive based on economical and environmental factors.     

石墨烯包覆天然球形石墨作为锂离子电池的负极材料，是否需要乙炔黑导电剂？

我们通过包覆炭化的方法制备得到了石墨烯包覆的天然球形石墨(G/SG)材料,并使用扫描电子显微镜、X射线衍射仪以及多种电化学测试手段考察了不同石墨烯含量的复合材料的形貌结构及电化学性能。我们发现,在不添加乙炔黑(AB)的情况下,G/SG复合材料表现出较高的首次库伦效率,很好的循环稳定性和高倍率性能。当石墨烯包覆量为1%时,材料50次循环后的可逆容量可与添加10%AB的天然石墨电极(SG)等同;当石墨烯包覆量为2.5%时,材料的比容量完全高于添加10%AB的石墨电极。材料电化学性能的改善归因于石墨烯的包覆。一方面,石墨烯的柔软可变性可以保证天然石墨颗粒在充放电过程中的结构完整性,从而有效改善材料的循环稳定性;另一方面,石墨烯的存在提高了电极的导电性,促进更好导电网络的形成。因此,石墨烯包覆天然球形石墨材料中,石墨烯不仅是活性物质,也发挥导电剂的作用。当添加5%的乙炔黑时,在50 mA·g^-1电流循环50次后,5%G/SG电极的可逆容量从381.1 mAh·g^-1提高到404.5 mAh·g^-1,在1 A·g^-1电流时可逆容量从82.5 mAh·g^-1提高到101.9 mAh·g^-1,这表明G/SG电极仍然需要乙炔黑导电剂。乙炔黑颗粒填充在复合材料的空隙中,通过点接触的形式连接到G/SG颗粒,与石墨烯协同作用形成了更加有效的导电网络。尽管石墨烯包覆和乙炔黑添加对天然石墨电极具有积极的影响,例如增加了天然石墨电极的导电性和储锂性能(包括可逆容量,倍率性能和循环性能),但随着石墨烯或乙炔黑的增加,电极密度通常会降低。因此,在实际应用中应考虑石墨负极材料的质量和体积容量的平衡。这些结果对天然石墨的进一步商业应用具有重要意义。我们的工作为天然石墨电极在锂电池中的电化学行为提供了一种新的认识,并且有助于制备更高性能的负极材料。     

Utilization of photocatalysts in decarboxylative coupling of carboxylic N-hydroxyphthalimide (NHPI) esters

Recently, the visible-light photoredox decarboxylative couplings of N-(acyloxy)phthalimides (NHPI esters) and its derivatives have become an efficient chemical transformation. Under visible light, the NHPI esters undergo a single-electron transfer (SET) process to afford the corresponding carbon or nitrogen radicals that participate in many chemical transformations. The photoredox decarboxylative couplings have been applied to achieve construction of an array of carbon–carbon and carbon–heteroatom bonds as well as the synthesis of carbocycles and heterocycles. This review categorises photocatalysts, discusses the application and catalysis mechanisms of NHPI esters, and details recent progress in this field.     

Branched plasticizers derived from eugenol via green polymerization for low/non-migration and externally/internally plasticized polyvinyl chloride materials

The synthesis of nontoxic plasticizers derived from the waste residues of the rosin-processing industry can reduce pollution and promote the high-value utilization of the waste residues of rosin. In this study, four kinds of sustainable branched plasticizers derived from a biomass resource, eugenol (derived from the waste residues of the rosin processing industry), were synthesized via one-pot solvent free polymerization and used to plasticize polyvinyl chloride (PVC). Internally plasticized PVC was fabricated using thiolated DPE (branched plasticizers based on eugenol). The thermal stability, tensile properties, microstructure, volatility behavior, and solvent extraction resistance of plasticized PVC were investigated. Compared with the behavior of the commercial plasticizer dioctyl phthalate, the thermal stability, plasticizing efficiency, and migration resistance of the branched plasticizers are superior. The acute oral toxicity dose of each branched plasticizer was extremely high at 5000 mg/kg of body weight, with no deaths among test animals. Compared with externally plasticized PVC, the internally plasticized PVC showed zero weight loss in volatility and leaching tests despite its less effective plasticization. All the branched plasticizers have potential application in plastic products.     

Enhanced photoactivity of CdS nanorods by MXene and ZnSnO3: Application in photoelectrochemical biosensor for the effect of environmental pollutants on DNA hydroxymethylation in wheat tissues

The photoactivity of CdS nanorods was greatly improved by amino functionalized accordion-like MXene and spherical ZnSnO₃. MXene possesses good electron transfer capability and ZnSnO₃ presents matched energy band with CdS, which deeply accelerate the electron transfer and prevent the recombination of photogenerated electron-hole pair, leading to a strong photoelectrochemical (PEC) response. Taking the merit of the improved photoactivity of CdS nanorods, a novel PEC biosensor was constructed for DNA hydromethylation detection based on immune recognition of target molecule, where 5-hydroxymethyl-2′-deoxycytidine triphosphate (5hmdCTP) was employed as detect target, CdS/MXene was used as photoactive material, and ZnSnO₃ was adopted as signal amplification unit. Under enzymatic covalent reaction of –CH₂OH of 5hmdCTP with –NH₂ of MXene, 5hmdCTP was specifically recognized and captured. Then, taking advantages of the covalent reaction between phosphate group of 5hmdCTP and ZnSnO₃, the signal amplification unit was captured. Under the optimum conditions, this PEC biosensor presents wide linear range of 0.008–100 nM and low detection limit of 4.21 pM (3σ). The applicability of the developed method was evaluated by investigating the effect of Cd²⁺ and perfluorohexane compound pollutant on 5-hydroxymethylcytosine content in the genomic DNA of the roots and leaves of wheat seedlings.     

Light-conversion phosphor nanoarchitectonics for improved light harvesting in sensitized solar cells

Photovoltaic technology provides a promising approach for solar energy conversion. One significant factor limiting the efficiency is the poor light harvesting of solar energy, which is related to the mismatch between the energy distribution of photons and the absorption of semiconductor materials or dye. Light-conversion phosphors have been explored as spectral converters to improve the light-harvesting ability in sensitized solar cells. Many progressive studies have been conducted to expand the family of light-conversion phosphors and exploit their application in sensitized solar cells, bringing emerging opportunities to develop commercial sensitized solar cells. In this review, we survey the development of light-conversion phosphors in sensitized solar cells. First, the application and conversion mechanism of light-conversion phosphors, including up-conversion phosphors, down-conversion phosphors, up/down conversion phosphors, and long-lasting phosphors, are summarized in detail. After that, the challenging problems and possible solutions of applying light-conversion phosphors to sensitized solar cells are discussed. The review also highlights some new ideas in the development of sensitized solar cells and the application of light-conversion phosphors in other solar technology.     

Microstructure performance and formation mechanism of laser alloying rare earth oxides modified nanocrystalline layer on TA7

Nanoscale particles (NP) were observed in a Ni60–Ag–Si₃N₄–Y₂O₃ laser alloying (LA) layer on a TA7 titanium alloy, NP usually locate on the grain boundaries, which are able to block the motion of dislocation in a certain extent. Such layer mainly consisted of γ-Ni, TiN, γ-(Fe, Ni), TiAg and lots of amorphous phases. The wear resistance of such layer with laser scanning speed 3 mm/s was better than that of a LA layer with 6 mm/s, which was mainly ascribed to an uniform microstructure and less defect of layer. The high laser scanning speed made the existing time of laser molten pool be shorter than before, favoring the formation of a fine microstructure. However, the defects, such as pores were produced in LA layer (higher scanning speed), decreasing the wear resistance.     

A cosolvent pretreatment: effect of solvent–water on enzymatic hydrolysis of glucan,lignin structure,and dynamics

Cellulose - In this study, a biomass pretreatment strategy with a recyclable cosolvent (toluene sulfonic acid/ethanol) was developed. The low boiling point solvent (78.15 °C),...     

基于非靶向代谢组学的茄梨和红茄梨成熟期果皮代谢产物的差异分析

为了探究西洋梨品种茄梨及其红色芽变红茄梨成熟期果皮代谢产物差异,采用超高效液相色谱-质谱联用技术,对茄梨和红茄梨成熟期果皮进行非靶向代谢组学研究。通过主成分分析和正交偏最小二乘判别分析,构建了多变量统计分析模型,结合模型和变量重要性投影与最大差异倍数值,基于精确质量数、二级碎片以及同位素分布,使用PMDB(Plant Metabolome Database)数据库进行定性,筛选并鉴定出茄梨和红茄梨果皮中显著性变化(P<0.05, VIP(variable importance in project)≥1)的差异代谢物有83种,主要包括酚酸类、黄酮类和氨基酸类物质,涉及类黄酮代谢、氨基酸代谢、苯丙烷类代谢等代谢途径,其中53种物质含量上调,30种物质表达下调。通过KEGG(Kyoto Encyclopedia of Genes and Genomes)数据库进一步对差异代谢物质进行通路富集分析,差异代谢物主要分布在20条代谢途径中,P<0.05的代谢途径有6条,分别是类黄酮生物合成、黄酮和黄酮醇生物合成、苯丙烷生物合成、丁酸酯代谢、苯丙氨酸代谢、酪氨酸代谢。这些差异代谢物的变化可能是导致茄梨和红茄梨果皮色泽不同的原因。该研究从植物代谢组学角度初步揭示了茄梨和红茄梨成熟期果皮的代谢产物差异性。